Articles by David Banig

Polyethylene Film Extrusion Intro
During the film extruder process there is a screw turning inside the extrusion barrel. There is a feed hopper at one end of the barrel and a specially shaped hole or die at the other, where the product comes out there is a type of die either for blown film (tube style)or flat die for sheeting materials.
Published 19Jan2008, viewed 141 times

Plastic Film Defects Ought To Be Caught
All possible plastic film defects ought to be detected and eliminated by the extruder operator before the roll gets shipped to the customer. But in practice, through oversight and inattention to detail defects can slip by that may be all too easily spotted by the customer or the customer's customer.
Published 02Jan2008, viewed 181 times

Slip additive used in plastic film and bags
Slip is an organic chemical that is added to plastic film extrusion process to modify the coefficent of friction.
Published 20Nov2007, viewed 154 times

Flexible Pouches Stand-Up To Maximize Shelf Appeal
Pouches use much less material than other traditional packaging methods like corrugated cartons or laminated boxes. Plastic laminated pouches can be customized to fit any of your needs but you need to understand why stand up pouches can be so beneficial to your business. Once you really understand how they are made, as they can be cheaper and run more efficiently than you may think.
Published 07Oct2007, viewed 240 times

Rubber Compounding Bags
Batch Inclusion film or bags derive their name from the fact the bag itself,along with contents,is actually included in the production batch or during rubber compounding.
Published 17Aug2007, viewed 146 times

Understanding Flexographic Printing
Flexographic printing is defined as a method of direct rotary printing that uses special rubber or photopolymer material. The printing plates are affixed to plate cylinders of various repeat lengths, which are inked by a cell structure (anolox roll) which is used to meter the flow of the ink on roll.
Published 29Jul2007, viewed 272 times

Plastic Valve Bags
Plastic valve bags with an Valvoplac or R Valve style are used for microscopic powders such as talc, glitter, or other tiny particles. Plastic valve bags with a Bigplac Valve (Satchel) are used for such products as sand, chemical resins, animal feed and agricultural seeds.
Published 17Jul2007, viewed 184 times

Stretch Hooder Film Makes For Better Pallet Stability vs Stretch Films!
Stretch Hooder films make use of co-polymers to stretch a film without permanent deformation. The film stretches in the machine direction and the transverse direction which improves the stress strain curve, and the material never reaches the plastic point before it reaches the permanent deformation. This allows the film to snugly form around the dimensions of the pallet.
Published 04Jul2007, viewed 195 times

We Automatically Distribute Articles
To Thousands Of Publishers And Web Sites:
Submit Article

All content is viewed and used by you at your own risk and we do not warrant the accuracy or reliability of any of the information. The views expressed are those of the individual contributing authors and not necessarily those of this web site, or its owner, Takanomi Limited.