	Article Directory		Article Submission Service		Article Marketing Blog		Publishers		Member Log In

Article Directory :: Home & Family Articles

How to Repair A DVD Drive on Your Xbox 360

By Eric K Frey

Republish: EasyPublish™
Status: In distribution [ ? ]
Word count: 434
Viewed: 92 time(s)

Get Free Content For Your Site

If your Xbox continues to encounter frozen games or the dirty disc error screen on your television, your problem is likely the internal DVD drive. While purchasing a replacement drive is a feasible option, you can save loads of money by instead taking the repair route. So, how would you go about fixing this issue?

A very important note to keep in mind is that you should avoid blowing canned air into the drive without opening it. It is a common misconception that this will work. In actuality, it may very well cause even further damage to the console. If you do so, all you will be affirming is that the dust will be redistributed evenly inside the drive.

Try not to feel bad about your recently attained problem; you will find there are actually a few easy steps that can be taken to solve your DVD drive problem. Your introductory option is to use a standard CD/DVD cleaner. These are widely abundant at many retail and/or video game stores. This cleaner resembles a normal CD, but with two small brushes attached on the bottom of them. Once inserted, the disc will lightly brush the lens, cleaning it of dust particles.

Your second procedure for repairing your Xbox 360 is to gather the information you have, and then figure out what drive you are working with. Figure out the manufacturer of your Xbox DVD drive and complete the disassembly tutorials. Some manufacturers you will most likely be working with include Thomson, Phillips, Laser Installation, or Samsung.

Once you have determined the manufacturer and completed the tear-down tutorials, the next thing to do is to clean the lens and mirror manually. This is where it is highly beneficial to you and your console to have thoroughly read and completed the tear down tutorials.

Your next maneuver is adjusting the potentiometer on the laser. This is fancy jargon meaning the voltage divider. Lastly, replace the laser in the DVD drive with your alternate laser you purchased either from Samsung, Phillips or Thompson. Although it may seem a bit drastic, replacement is actually a fairly manageable process if you follow the steps meticulously.

The last item to consider on repairing the Xbox is purchasing a completely new drive. However, if money is a factor, there are quality instructions widely available on the internet that can help you repair the system on your own. Also, make sure that you follow a reputable guide. Sometimes it can prove to be a relatively quick fix done manually, and it may prove to be a wise choice in the end.

Eric Frey is an avid XBox 360 gamer who has experienced the Ring of Death on his XBox. If you want to learn the methods he used to fix his XBox, then you will need a XBox Repair Guide that will walk you through the process. Eric found a few really great 3 Red Light Fix guides that are guaranteed to fix your XBox. You can check out the 3 best repair guides at www.topxboxrepairguides.com

EasyPublish™ this article - publishers click here