	Article Directory		Article Submission Service		Article Marketing Blog		Publishers		Member Log In

Article Directory :: Home & Family Articles

How to Open Clogged Sink Drain

By Scott Rodgers

Republish: EasyPublish™
Published: 24Apr2009
Word count: 513
Viewed: 112 time(s)

Get Free Content For Your Site

Perhaps the most common plumbing task that people tackle frequently is the opening of a clogged drain. Although professional plumbers tackle the job in the best of ways, there are a good number of people who try to do the job themselves. The difference in the outcome can be counted in the areas of quality and professionalism—or simply doing it oneself, which may be more affordable. Even if you don't intend to do it yourself, it doesn't hurt to know the basics; you never know when they may come in handy. For this article, we will focus more on clogged sinks though the tactics are more or less common for other types of clogged jobs too.

Sometimes, the sink isn't fully clogged but is just sluggish, with water running down at snail pace inside the drain. If that's the issue, try running hot water through the pipes for a couple minutes. If it's soap scum or oil, or grease, this may do the job for you. If this approach does not turn out to be sufficient, you should use a good drain cleaner rather than simply using hot water.

You would find that usually, hot water and drain cleaners don't do a great job. The best and easiest approach then is to get into your plumbing dress and pick up the plunger. Fill up the sink a little bit with water and place the plunger on the strainer. Now start pushing in and out quickly with force and keep plunging for some time without stopping. Pressure would build up inside the pipes and may move whatever is blocking the flow of water. Small clogs rarely hold back against plunger pressure, especially if it's continual and exerted with greater force. For better results, use a rubber plunger rather than a plastic one.

If plungers don't do the job for you, then you need to work on the drain trap. Take a bucket and put it just beneath the trap and open the trap. You may find some hair or other stuff there that may be clogging the drain. Clean up the trap as much as you can and see if that solves your problem. You can run water for a few minutes to see if everything works well now.

If the line is still blocked even after cleaning the trap, then the problem would be inside the wall drain. Take a cable auger and insert the cable into the stub-out till it reaches the clog. Push the cable harder so that it would pass through the clog. Now pull it back and most of the clog will come out with the cable.

Fix the trap back and run water through the sink to check if the flow is fine now. Though cable auger clears the bulk of the clog, some small hair or clogs may still be there attached to the walls of the drain pipe. So if you still experience slow water flow, use the plunger to clear any leftover debris inside the pipes.

Scott Rodgers is a plumber who has recently begun writing articles for both a plumbing and non-plumbing audience. To view more of plumbing articles, visit http://eLocalPlumbers.com

EasyPublish™ this article - publishers click here